快乐飞艇基本走势图
Made to a proven, traditional design, the Mitre range of environmental camera housings are extremely compact yet spacious enough (particularly the new 903) to accommodate larger camera/lens combinations.
Broadening the range of applications to include corrosive and clean environments, Small (901) and Medium (900) aluminum cased housings cases are now available in 316 stainless steel (801 and 800).
Toughened glass and stainless-steel fittings/fastenings ensure long operational life and two entry glands and a grommeted hole are provided for efficient cable management to secure the units’ IP66 integrity.
A deep base allows the fitting of an optional integral, self-parking wiper which incorporates a micro switch for self-parking. Standard accessories include an extended camera plate, steel safety strap and wiring distribution block. A PTC resistor heater with progressive performance is also provided which eliminates the need for a thermostat and when the heat’s on, optional double skinned sunshields are available for all models. The roomy new 903 (standard length) can even be supplied with a fan cooled sunshield which draws air through the housing to prevent overheating in extreme conditions.
快乐飞艇在线计划
- Uncompromising construction
- Lightweight sheet aluminum or 316 stainless steel casing and tray
- New 903 series
- Extra height and width as standard plus short and integral cooling fan versions
- Deep bottom tray
- Suitable for housing integral wiper or accessories
- Built to last
- Stainless steel fasteners
- Weatherproof
- Sealed to IP rating 66
- Accessories
- Extended paxolin camera plate and stainless steel safety strap
- PTC Resistor heater
- Progressive performance without the need of a thermostat (available on request)
- Cable management
- Two entry glands at 20mm and one hole at 25mm for Kopex or Adaptaflex
- Integral wiper option
- Micro switch self parking wiper with blade toggle action
快乐飞艇公式
| Specifications | 901/801 | 900/800 | 903 | 902 |
|---|---|---|---|---|
| Height | 7.6 in. / 192 mm | 9.1 in. / 230 mm | 9.5 in. / 242 mm | 10.2 in. / 259 mm |
| Width over clips | 6.2 in. / 156 mm | 7.1 in. / 180 mm | 9.1 in. / 230 mm | 9.1 in. / 232 mm |
| Width over sunshield | 6.0 in. / 151 mm | 6.9 in. / 174 mm | 8.9 in. / 227 mm | 9.2 in. / 233 mm |
| Length over sunshield | 17.0 in. / 430 mm | 23.6 in. / 600 mm | 24.4 in. / 620 mm | 30.0 in. / 760 mm |
| Depth inside base | 2.2 in. / 55 mm | 2.2 in. / 55 mm | 2.3 in. / 57 mm | 2.2 in. / 55 mm |
| Weight (Kg) | ||||
| Aluminium without wiper | < 5.5 lb. / 2.5 kg | < 7.7 lb. / 3.5 kg | 15.4 lb. / 7 kg | < 13.2 lb. / 6.0 kg |
| Aluminium with wiper | < 6.6 lb. / 3.0 kg | < 8.8 lb. / 4.0 kg | 16.5 lb. / 7.5 kg | < 14.3 lb. / 6.5 kg |
| 316 stainless without wiper | 10.4 lb. / 4.7 kg | 18.1 lb. / 8.2 kg | N/A | N/A |
| 316 stainless with wiper | TBA | TBA | N/A | N/A |
| Fixing centers | ||||
| Base | 4 holes tapped M6 on 101.6 PCD (4”) square to base | |||
| Platform | 4 slots 7.0 wide x 25 long in 225 long Paxolin or aluminium (903 units) plate (1 x ¼” UNC hex screw supplied) |
|||
| Voltage | 240VAC, 24VAC, 12VDC, 24VDC nominal | |||
| Capacity (l x w x h) / (in. / mm) | 13.0 in. x 4.5 in. x 4.3 in. / 330 x 114 x 110 mm | 20.1 in. x 5.5 in. x 5.7 in. / 510 x 140 x 145 mm | 19.9 in. x 5.5 in. x 5.7 in. / 510 x 140 x 145 mm | 25.6 in. x 7.1 in. x 6.7 in. / 650 x 180 x 170 mm |
| Options (all models) | Integral self parking wiper, internal fan, washer, thermostat, double skinned sunshield | |||
| Options (903 only) | Fan cooled sunshield housing (12VDC, 540mA running current draw) with replaceable filter | |||
| Heater | Progressive up to 32W | |||
| Wiring and connections | Single row (double row with fan option), 12 way terminal block(s), 2 x 20 mm cable glands plus blanked, 25 mm hole for Kopex or Adaptaflex |
|||
| Recommended cable | 16/0.2 (rated at 230V for mains versions) | |||
| House color (900 series) | Goose Grey, textured, semi gloss (BS4800 00A 05) | |||
| Temperature Range | -4° to 122° F / -20° to +50° C | |||